(SOLO) BUILDMATE Makita 40V Max XGT Brushless Cordless Impact Driver / Drill Variable Speed TD001GZ

(SOLO) BUILDMATE Makita 40V Max XGT Brushless Cordless Impact Driver / Drill Variable Speed Brushless Motor TD001GZ

SPECIFICATIONS:
►Model: TD001GZ
►Voltage: 40V
►Capacity:
- Machine Screw: M4 – M8 (5/32″ Inch – 5/16″ Inch)
- Standard Bolt: M5 – M16 (3/16″ Inch – 5/8″ Inch)
- High Strength Bolt: M5 – M14 (3/16″ Inch – 9/16″ Inch)
- Coarse Thread (in length): 22mm – 125mm (7/8″ Inch – 4-7/8″ Inch)
►Hex Shank: 6.35mm / 1/4" Inch
►Max Fastening Torque: 220Nm
►Impacts Per Minute (IPM) Mode:
- Max: 0-4,400ipm
- Hard: 0-3,600ipm
- Mid: 0-2,600ipm
- Soft: 1,100ipm
- Wood: 4,400ipm
- Bolt (1): N/A
- Bolt (2): 4,400ipm
- Bolt (3): 4,400ipm
- T (1): N/A
- T (2): 2,600ipm
►No Load Speed (RPM):
- Max: 0-3,700rpm
- Hard: 0-3,200rpm
- Mid: 0-2,100rpm
- Soft: 0-1,100rpm
- Wood: 1,800rpm
- Bolt (1): 2,500rpm
- Bolt (2): 3,700rpm
- Bolt (3): 3,700rpm
- T (1): 2,400rpm
- T (2): 3,700rpm
►Fastening Torque:
- Hard: 170Nm (1,510 in. lbs.)
- Mid: 50Nm (440 in. lbs.)
- Soft: 20Nm (180 in. lbs.)
►Max Power Output: 600W
►Vibration Level (Impact tightening of fasteners of the maximum capacity of the tool): 10.0m/s²
►Vibration K Factor (Impact tightening of fasteners of the maximum capacity of the tool): 1.5m/s²
►Sound Pressure Level: 96dB(A)
►Sound Power Level: 107dB(A)
►Noise K Factor: 3dB(A)
►Dimensions (L x W x H):
- With BL4025: 120mm x 86mm x 245mm (4-3/4″ Inch x 3-3/8″ Inch x 9-5/8″Inch)
- With BL4040: 120mm x 86mm x 250mm (4-3/4″ Inch x 3-3/8″ Inch x 9-7/8″ Inch)
►Net Weight: 1.7 – 2.0 kg (3.7 – 4.4 lbs.)

FEATURES:
►High Power 220 Nm
►Genuine solution for high demand industrial users
►Having excellent ability to perform heavy-duty continuous tightening; Able to continuously tighten heavy duty screws such as metal fastening screws or lag screws
►Delivers up to 50% higher work speed than DTD171
►Multiple operation modes for a wide range of applications; 4-speed power selection plus 6 Assist modes (2 T-modes, 1 Wood mode, 3 Bolt modes)
►Improved bolt modes for more convenience in tightening machine screws
►Constant speed control maintains fastening torque by preventing the rotation speed reduction caused by decreased battery capacity
►New one-touch bit installation; In order to prevent the bit from unexpectedly falling off, more effective mechanism has been realized by increasing the spring load of the sleeve holding spring and by adding a coil spring not to increase resistance against insertion of the bit
►One-touch speed selector provides precise fastening control for a wide range of applications
►Enhanced anvil holder rigidity; Material change from Needle bearing to Ball bearing provides reduction of bit wobbling
►Variable speed control by trigger for precise fastening in a wide variety of applications
►Built-in LED light illuminates the work area